PCS PulseWorx UPB Wall Controller, 7 Button, White (KPCW-7-W)
Imagine all the ways you’d like to control your UPB system, and then install the PulseWorx UPB Keypad Wall Controller (7 Button). As a wire-in UPB transceiver, this home automation keypad can control seven single UPB devices or entire scenes, and send signals to a main control unit. The keypad features adjustable LED brightness and blue backlighting for easy nighttime viewing, as well as a temporary lock to keep children or guests from changing your settings.Controls 7 single UPB devices or entire scenesBacklighting for easy nighttime viewingTemporary lockout prevents unauthorized useMounts in a single- or multi-gang box NOTE: Wallplate not included. Each of the "scene" buttons on the keypad controls one of 16 modes and sends commands upon a single tap, double tap, long press, or release. The controller is pre-programmed with six preset lighting scenes, which you can use to create inviting light levels without custom programming. LED presets also individually configure which LED indicators will light up or turn off in response to different scenes. IR Remote Control Because the keypad accepts infrared (IR) commands, connected UPB devices can be controlled with an optional IR remote (sold separately). The remote will reproduce commands for each of the buttons, allowing true remote control from across the room. Simple Installation The Keypad Wall Controller mounts in a single- or multi-gang box and connects to line and neutral wires. Once wired, it can transmit and receive UPB commands and status reports over your home’s existing powerlines.Technical DetailsMPN: KPCW-7-WUPC: 811976013754Color: White ElectricalPower Requirements: Primary: 120 Volts AC, 50/60HzTransmission Channels: 7 Links/ScenesConnections/Power Wire: Two 16 AWG gauge, 105 C insulation; Black - Hot/Line; White - NeutralStandby Power Consumption: 0.8 WattsEnvironmental Conditions: Indoor Use OnlyOperating Temperature: -40 to 194° F (-40 to 90° C)Operating Humidity: 10 to 90 percent RH (non-condensing)Certifications: Safety tested for USA and Canada to ETL tested to UL508; UL-508-2010CSA C22.2 #14-2010 OperationStatus LED Modes: All programmable with UPStart On, Opposite, Off, N/CLED Indicators: One per button; LED reflects status of GroupIR Receiver: YesDuring Power Outage: Retains all settings in Non-volatile EERPOMSetup Mode: Press and Hold ON and OFF Button for 3 Seconds - All LEDs will Flash MechanicalButton Type: 5 mechanical latching contact type buttons, 2 Momentary contact type buttonsWire Nuts: 2 includedMounting: Single Gang or multiple-ganged junction boxDimensions: 4.1(H) x 1.7(W) x 1.8(D) inchesWeight: 5 ouncesWarranty: 5 yearsUS Patent No.: 6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending.
Specifications
| Return Shipping Will Be Paid By | Seller |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| MPN | KPCW-7-W |
| Shipping Profile ID | 58890620020 |
| Type | UPB Controller |
| Model | KPCW-7-W |
| Connectivity | N/A |
| Color | White |
| Country/Region Of Manufacture | United States |
Imagine all the ways you’d like to control your UPB system, and then install the PulseWorx UPB Keypad Wall Controller (7 Button). As a wire-in UPB transceiver, this home automation keypad can control seven single UPB devices or entire scenes, and send signals to a main control unit. The keypad features adjustable LED brightness and blue backlighting for easy nighttime viewing, as well as a temporary lock to keep children or guests from changing your settings.Controls 7 single UPB devices or entire scenesBacklighting for easy nighttime viewingTemporary lockout prevents unauthorized useMounts in a single- or multi-gang box NOTE: Wallplate not included. Each of the "scene" buttons on the keypad controls one of 16 modes and sends commands upon a single tap, double tap, long press, or release. The controller is pre-programmed with six preset lighting scenes, which you can use to create inviting light levels without custom programming. LED presets also individually configure which LED indicators will light up or turn off in response to different scenes. IR Remote Control Because the keypad accepts infrared (IR) commands, connected UPB devices can be controlled with an optional IR remote (sold separately). The remote will reproduce commands for each of the buttons, allowing true remote control from across the room. Simple Installation The Keypad Wall Controller mounts in a single- or multi-gang box and connects to line and neutral wires. Once wired, it can transmit and receive UPB commands and status reports over your home’s existing powerlines.Technical DetailsMPN: KPCW-7-WUPC: 811976013754Color: White ElectricalPower Requirements: Primary: 120 Volts AC, 50/60HzTransmission Channels: 7 Links/ScenesConnections/Power Wire: Two 16 AWG gauge, 105 C insulation; Black - Hot/Line; White - NeutralStandby Power Consumption: 0.8 WattsEnvironmental Conditions: Indoor Use OnlyOperating Temperature: -40 to 194° F (-40 to 90° C)Operating Humidity: 10 to 90 percent RH (non-condensing)Certifications: Safety tested for USA and Canada to ETL tested to UL508; UL-508-2010CSA C22.2 #14-2010 OperationStatus LED Modes: All programmable with UPStart On, Opposite, Off, N/CLED Indicators: One per button; LED reflects status of GroupIR Receiver: YesDuring Power Outage: Retains all settings in Non-volatile EERPOMSetup Mode: Press and Hold ON and OFF Button for 3 Seconds - All LEDs will Flash MechanicalButton Type: 5 mechanical latching contact type buttons, 2 Momentary contact type buttonsWire Nuts: 2 includedMounting: Single Gang or multiple-ganged junction boxDimensions: 4.1(H) x 1.7(W) x 1.8(D) inchesWeight: 5 ouncesWarranty: 5 yearsUS Patent No.: 6,734,784; 6,784,790; 7,265,654; 7,688,183. U.S. and foreign patents may be pending.
Related Items
