Aeotec Z-Wave Plus v2 Water Sensor 7 Pro, Gen7 (ZWA019)
Immediately learn when leaks and flooding appear with the Aeotec Z-Wave Water Sensor 7 Pro. This Z-Wave leak sensor sends alerts when it detects water in sensitive areas, preventing water damage or flooding from damaging your property. Built-in temperature and humidity sensors assist the leak sensor in reporting environment conditions, and Z-Wave 700 software increases all three sensor's transmission range, battery life, and signal encryption for guaranteed operation.Z-Wave 3-in-1 sensor reports water presence, ambient temperature, and humidityDetects both presence of water in unwanted areas and low water levels in containersCapable of issuing On/Off Z-Wave commands to Z-Wave connected pumps, valves, and other devicesBuilt-in temperature and humidity sensors report real-time environment conditionsAssists in monitoring for the potential for harmful mould spores when paired with devices using aërQ technology The Water Sensor 7 Pro can detect as little as 0.5mm or 0.02" of water in a designated area. This level of sensitivity gives you the maximum amount of time to respond to an alert before serious damage occurs. The Water Sensor 7 Pro can be programmed to work with smart water valves or electronic sump pumps to seal off in case of a pipe burst or leak, or even coordinate with Z-Wave controllers to shut off electronics to prevent electrical shortages.Installation Details The Water Sensor 7 Pro can be placed on any flat surface whether on the floor, countertop, or adhered to a wall appliance, or any other vertical surface. The sensor's small size allows you to place it in virtually any hard to reach space where water can accumulate.Z-Wave Plus v2 Certification Z-Wave Plus v2 is an upgraded Z-Wave certification program to help you identify products that take advantage of the latest Z-Wave hardware platform, also known as 700 Series or Gen7 Z-Wave. Z-Wave Plus v2 compatible devices include extended wireless range up to 2600 ft/800 m, three layers of encryption, faster operation, and longer battery life.ContentsWater Sensor 7 ProCover(2) Double-Sided Tape(4) Dowels(4) Screws NOTE: Requires a Z-Wave network controller to operate. Batteries not included.Technical DetailsManufacturer Part #: ZWA019UPC: 810667025335Color: WhiteZ-Wave Version: 7.12 or laterSmart Start: YesRepeater: NoBeaming Capable: NoSecurity Supported: S2 Unauthenticated, S2 AuthenticatedOperating distance:Approx 164 feet indoors, Up to 492 feet outdoorsApprox 50 meters indoors / Up to 150 meters outdoorsProbe Wire Length: 4.9ft (1.5m)Dimensions: 2.76 x 0.51 x .79 inches (70 x 13 x 20 mm)Relative Humidity Range: 8% to 80%, RH ± 3%Temperature Range: -10 to 65°C (± 1°C) / 14 to 149°F, (± 1.8°F)Operating Humidity: 10% to 95%Operating Temperature: 0°C to 45°C (32°F to 113°F)Storage Temperature: -22°F to 158°F (-30°C to 70°C)Waterproofing: IP65 ratingMax Current Consumption: 5mWBattery Type: 1/2 AA ER14250 3.6VBattery Life: 3 yearsWeight: 42gWarranty: 1-Year Limited
Specifications
| Return Shipping Will Be Paid By | Seller |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| Brand | Aeotec |
| MPN | ZWA019 |
| Shipping Profile ID | 239879032020 |
| Type | Z-Wave Accessory |
| Model | ZWA019 |
| Compatible Brand | Aeotec |
| Connectivity | Wireless |
| Color | White |
Immediately learn when leaks and flooding appear with the Aeotec Z-Wave Water Sensor 7 Pro. This Z-Wave leak sensor sends alerts when it detects water in sensitive areas, preventing water damage or flooding from damaging your property. Built-in temperature and humidity sensors assist the leak sensor in reporting environment conditions, and Z-Wave 700 software increases all three sensor's transmission range, battery life, and signal encryption for guaranteed operation.Z-Wave 3-in-1 sensor reports water presence, ambient temperature, and humidityDetects both presence of water in unwanted areas and low water levels in containersCapable of issuing On/Off Z-Wave commands to Z-Wave connected pumps, valves, and other devicesBuilt-in temperature and humidity sensors report real-time environment conditionsAssists in monitoring for the potential for harmful mould spores when paired with devices using aërQ technology The Water Sensor 7 Pro can detect as little as 0.5mm or 0.02" of water in a designated area. This level of sensitivity gives you the maximum amount of time to respond to an alert before serious damage occurs. The Water Sensor 7 Pro can be programmed to work with smart water valves or electronic sump pumps to seal off in case of a pipe burst or leak, or even coordinate with Z-Wave controllers to shut off electronics to prevent electrical shortages.Installation Details The Water Sensor 7 Pro can be placed on any flat surface whether on the floor, countertop, or adhered to a wall appliance, or any other vertical surface. The sensor's small size allows you to place it in virtually any hard to reach space where water can accumulate.Z-Wave Plus v2 Certification Z-Wave Plus v2 is an upgraded Z-Wave certification program to help you identify products that take advantage of the latest Z-Wave hardware platform, also known as 700 Series or Gen7 Z-Wave. Z-Wave Plus v2 compatible devices include extended wireless range up to 2600 ft/800 m, three layers of encryption, faster operation, and longer battery life.ContentsWater Sensor 7 ProCover(2) Double-Sided Tape(4) Dowels(4) Screws NOTE: Requires a Z-Wave network controller to operate. Batteries not included.Technical DetailsManufacturer Part #: ZWA019UPC: 810667025335Color: WhiteZ-Wave Version: 7.12 or laterSmart Start: YesRepeater: NoBeaming Capable: NoSecurity Supported: S2 Unauthenticated, S2 AuthenticatedOperating distance:Approx 164 feet indoors, Up to 492 feet outdoorsApprox 50 meters indoors / Up to 150 meters outdoorsProbe Wire Length: 4.9ft (1.5m)Dimensions: 2.76 x 0.51 x .79 inches (70 x 13 x 20 mm)Relative Humidity Range: 8% to 80%, RH ± 3%Temperature Range: -10 to 65°C (± 1°C) / 14 to 149°F, (± 1.8°F)Operating Humidity: 10% to 95%Operating Temperature: 0°C to 45°C (32°F to 113°F)Storage Temperature: -22°F to 158°F (-30°C to 70°C)Waterproofing: IP65 ratingMax Current Consumption: 5mWBattery Type: 1/2 AA ER14250 3.6VBattery Life: 3 yearsWeight: 42gWarranty: 1-Year Limited
Related Items
