Garage Door Quick Bearing Roller Change Tool 2" Track 10 Rollers Under 4 Minutes
Garage Door Quick Bearing Roller Change Tool 2" Track 10 Rollers Under 4 Minutes Provides a fast and easy way to replace rollers on a standard residential garage doorChange up to 10 rollers in under 4 minutesIncludes extractor and inserterRecommended for residential 2″ track onlyInstructions Extractor which is the tool with the flat face and flat bar handle Inserter which is the tool with the trident face Only one side of the door should be worked on at a time Slightly raise the door out off the ground by 2" or 3" inches, slip the Extractor with the flat head face behind the roller and inside face the track and twist to remove the roller, start from the bottom and go the highest hinche (the top roller on each upper corners will be removed separately), once the rollers are being extracted out of the track use the flat handle of the Extractor to pull the door away from the track to remove the rollers Once all the new rollers are inserted use again the flat handle portion of the Extractor to put the door back facing the track, use the Inserter to snap the rollers back into the track Repeat steps on the other side of the door Top 2 Rollers Open the door to the highest position, use the Extractor to remove the roller from the track, replace the roller, raise the door and use the Inserter to snap the roller back into the track
Specifications
| Return Shipping Will Be Paid By | Seller |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Brand | Hardware Store |
| Model | QUICKCHGROLLE |
| MPN | AAA-26-100SG |
Garage Door Quick Bearing Roller Change Tool 2" Track 10 Rollers Under 4 Minutes Provides a fast and easy way to replace rollers on a standard residential garage doorChange up to 10 rollers in under 4 minutesIncludes extractor and inserterRecommended for residential 2″ track onlyInstructions Extractor which is the tool with the flat face and flat bar handle Inserter which is the tool with the trident face Only one side of the door should be worked on at a time Slightly raise the door out off the ground by 2" or 3" inches, slip the Extractor with the flat head face behind the roller and inside face the track and twist to remove the roller, start from the bottom and go the highest hinche (the top roller on each upper corners will be removed separately), once the rollers are being extracted out of the track use the flat handle of the Extractor to pull the door away from the track to remove the rollers Once all the new rollers are inserted use again the flat handle portion of the Extractor to put the door back facing the track, use the Inserter to snap the rollers back into the track Repeat steps on the other side of the door Top 2 Rollers Open the door to the highest position, use the Extractor to remove the roller from the track, replace the roller, raise the door and use the Inserter to snap the roller back into the track
Related Items
