Pentek Single ELPC-30 Electroplating Cartridge Pentek 255670-43 Mint!
Pentek Single ELPC-30 Electroplating CartridgePentek 255670-43. Some have small tears in the plastic but still mint. This Pentek ELPC 30 Filter Cartridge Replacement is a 30 inch electroplating filter for use in various electroplating applications and electroplating solutions. The Pentek # 255670-43 is standard diameter filter (2 7/8" diameter). The Pentek ELPC30 uses Fibredyne technology which is the best filter technology available for use in a wide range of electroplating applications in order to help prevent plating porosity and brittleness. Pentek ELPC-30 Filter Replacement Specifications: - Connection: Drop in - Temp. Range: 40 - 180 F - Initial Pressure Drop: 3.4 PSI - Micron Rating: 7 micron nominal - Dimensions: 30" length x 2 7/8" diameter - Filter Media: Granular activated carbon (GAC) - Reduces: Sulfur, chlorine, sediment, dirt, and other chemicals and impurities - Gallons Per Minute: About 3 GPM flow rate depending on specific filter system - Filter Life: About 3-6 months depending on usage and water quality; filter should be replaced when a reduction in flow rate is noticed - Description and Dimensions Dimensions: 2-7/8" x 30" (73 mm x 762 mm) Micron Rating (Nominal): 7 microns Temperature Rating: 40-180F (4.4-82.2C) Initial P (psi) @ Flow Rate (gpm): 3.4 psi @ 3.0 gpm (0.2 bar @ 11.4Lpm) Filter Media: Advanced Bonded PAC End Caps: Polypropylene Netting: Polyethylene Gasket: Santoprene NOTE: this cartridge should be flushed for a few minutes prior to first use in order to remove excess carbon fines
Specifications
| All Returns Accepted | ReturnsNotAccepted |
| Brand | Pentek |
| Type | Water Filter |
| Model | Pentek ELPC-30 |
| Compatible Model | Electroplating |
| Material | Plastic |
| Filtration Method | Carbon Block |
Pentek Single ELPC-30 Electroplating CartridgePentek 255670-43. Some have small tears in the plastic but still mint. This Pentek ELPC 30 Filter Cartridge Replacement is a 30 inch electroplating filter for use in various electroplating applications and electroplating solutions. The Pentek # 255670-43 is standard diameter filter (2 7/8" diameter). The Pentek ELPC30 uses Fibredyne technology which is the best filter technology available for use in a wide range of electroplating applications in order to help prevent plating porosity and brittleness. Pentek ELPC-30 Filter Replacement Specifications: - Connection: Drop in - Temp. Range: 40 - 180 F - Initial Pressure Drop: 3.4 PSI - Micron Rating: 7 micron nominal - Dimensions: 30" length x 2 7/8" diameter - Filter Media: Granular activated carbon (GAC) - Reduces: Sulfur, chlorine, sediment, dirt, and other chemicals and impurities - Gallons Per Minute: About 3 GPM flow rate depending on specific filter system - Filter Life: About 3-6 months depending on usage and water quality; filter should be replaced when a reduction in flow rate is noticed - Description and Dimensions Dimensions: 2-7/8" x 30" (73 mm x 762 mm) Micron Rating (Nominal): 7 microns Temperature Rating: 40-180F (4.4-82.2C) Initial P (psi) @ Flow Rate (gpm): 3.4 psi @ 3.0 gpm (0.2 bar @ 11.4Lpm) Filter Media: Advanced Bonded PAC End Caps: Polypropylene Netting: Polyethylene Gasket: Santoprene NOTE: this cartridge should be flushed for a few minutes prior to first use in order to remove excess carbon fines
Related Items
