10 PCS LED Strip Connectors 4 Pin for 10mm RGB Strip Lights + 5M Extension Cable
About this item💡Perfect combination: LED connectors contains 10 pack of rgb led connectors and a 16.4ft extension cord. Suitable for 4 Pin 10mm wide waterproof and non-waterproof light strips.💡 Upgraded Connector: The led extension cable is 22 AWG and contains 17 tinned copper stranded wires and high quality PVC plastic wire sleeve, the led transparent connector can stably connect the LED strip without falling off, which is stronger than the old-fashioned connector.💡Application upgrade: The 4pin led connector kit is suitable for 5V, 12V, 24V LED strips, Whether it is a waterproof light strip or a non-waterproof light strip, it can be used. Tip: only suitable for 10mm wide 4pin strips, not suitable for 8 mm LED strips.💡 Flexible operation: The rgb led connectors can be cut to the length you want at will, which can solve the distance problem when you decorate the wine cabinet, eaves, wall corner or car.💡Simple operation: No need to peel off insulation, no need to weld, no need to strip off the waterproof cover of the light strip, fast and flexible connection, saving time and effort. The picture details how to use the connector. Flexible installationNo soldering requiredNo wire stripping requiredEasy to useApplication upgrade Input voltage: DC 5V/12V/24VWhat light strips are suitable for: non-waterproof light strips and glued waterproof light stripsMaterial: Stranded tin copper wire and high quality PVC plasticApplicable strip width: 10mm wideWarm Tip: you can pry it open with a suitable screwdriver if accidentally cover the connector. 22AWG solid wire Extension cable contains 17 tinned copper stranded wires and high quality PVC plastic wire sleeve.Small tool Small tool can be used to pry open the strip end of the connector, which is more convenient.Upgraded connector The upgraded connector does not distinguish between waterproof and non-waterproof light strips, both are suitable.NOTE:Make sure your LED light strip is 10mm width 4 pin RGB strip light. It is work for waterproof and non-waterproof led strip lights.Ensure your Wire Diameter is within range 20AWG-22AWG /0.34~0.75 mm2 and without stripping wire. Installation GuidesStrip EndEnsure your LED light strip is 10mm width and has 4 contacts (+, B, R, G). All contacts are clean and cut the strip straightly.Open the transparent cover of connector up to 45 degrees.Peel off the 3M tape around the cutting line area on the back of the LED strip, then insert the LED light strip into strip side, with the 4 contacts of the LED strip sitting on the 4 pins of the clasp.Close the clasp down with force by pliers. Wire EndCut the desired wire length you need and separated the 4 wires (20-22AWG) around connection part.Insert wires into the connector guide slot; Make sure that positive & negative on the strip light surface are corresponding to correct wires.Close the transparent cap with a pliers until it is fully seated on both sides of the bottom base. Ensure the metal joint pierces through the wire insulation. (Note: No stripping wires. Positive wire is matched to "+" input power mark on the strip light surface) Tools Need: A pliers Package includes 10x Strip to Wire LED Connectors for 10mm Width RGB LED Strip(both waterproof and non-waterproof strips are suitable) 1x 16.4ft 22 Gauge 4 Conductor Extension Cable
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| LED Chip Code | 5050 |
| Power Source | Corded |
| Color | Clear |
| Material | Plastic |
| Installation Area | Indoor & Outdoor |
| Connectors | 4 Pin |
| Brand | Supernight |
| Department | Adults |
| Voltage | 12 V |
| Amperage | 5 A |
| Features | Waterproof |
| Output Voltage | 12 V |
| Lighting Technology | LED |
About this item💡Perfect combination: LED connectors contains 10 pack of rgb led connectors and a 16.4ft extension cord. Suitable for 4 Pin 10mm wide waterproof and non-waterproof light strips.💡 Upgraded Connector: The led extension cable is 22 AWG and contains 17 tinned copper stranded wires and high quality PVC plastic wire sleeve, the led transparent connector can stably connect the LED strip without falling off, which is stronger than the old-fashioned connector.💡Application upgrade: The 4pin led connector kit is suitable for 5V, 12V, 24V LED strips, Whether it is a waterproof light strip or a non-waterproof light strip, it can be used. Tip: only suitable for 10mm wide 4pin strips, not suitable for 8 mm LED strips.💡 Flexible operation: The rgb led connectors can be cut to the length you want at will, which can solve the distance problem when you decorate the wine cabinet, eaves, wall corner or car.💡Simple operation: No need to peel off insulation, no need to weld, no need to strip off the waterproof cover of the light strip, fast and flexible connection, saving time and effort. The picture details how to use the connector. Flexible installationNo soldering requiredNo wire stripping requiredEasy to useApplication upgrade Input voltage: DC 5V/12V/24VWhat light strips are suitable for: non-waterproof light strips and glued waterproof light stripsMaterial: Stranded tin copper wire and high quality PVC plasticApplicable strip width: 10mm wideWarm Tip: you can pry it open with a suitable screwdriver if accidentally cover the connector. 22AWG solid wire Extension cable contains 17 tinned copper stranded wires and high quality PVC plastic wire sleeve.Small tool Small tool can be used to pry open the strip end of the connector, which is more convenient.Upgraded connector The upgraded connector does not distinguish between waterproof and non-waterproof light strips, both are suitable.NOTE:Make sure your LED light strip is 10mm width 4 pin RGB strip light. It is work for waterproof and non-waterproof led strip lights.Ensure your Wire Diameter is within range 20AWG-22AWG /0.34~0.75 mm2 and without stripping wire. Installation GuidesStrip EndEnsure your LED light strip is 10mm width and has 4 contacts (+, B, R, G). All contacts are clean and cut the strip straightly.Open the transparent cover of connector up to 45 degrees.Peel off the 3M tape around the cutting line area on the back of the LED strip, then insert the LED light strip into strip side, with the 4 contacts of the LED strip sitting on the 4 pins of the clasp.Close the clasp down with force by pliers. Wire EndCut the desired wire length you need and separated the 4 wires (20-22AWG) around connection part.Insert wires into the connector guide slot; Make sure that positive & negative on the strip light surface are corresponding to correct wires.Close the transparent cap with a pliers until it is fully seated on both sides of the bottom base. Ensure the metal joint pierces through the wire insulation. (Note: No stripping wires. Positive wire is matched to "+" input power mark on the strip light surface) Tools Need: A pliers Package includes 10x Strip to Wire LED Connectors for 10mm Width RGB LED Strip(both waterproof and non-waterproof strips are suitable) 1x 16.4ft 22 Gauge 4 Conductor Extension Cable
Related Items
