75 GPD Reverse Osmosis RO Membrane with Quick Change Housing for Geekpure RO-TW
About this item 75 GPD Ro Membrane with quick change membrane housing, extra tool is not required.98% Stabilized Salt Rejection (Minimum Rejection 96%).Dry type TFC Membrane,Maximizing shelf life.the ratio of pure water and waste water is 1:2.Pack of 2 High Efficient-Rejects impurities down to 0.0001 micron,Removes Heavy Metal,Arsenic,Lead,Mercury,Fluoride,Cadmium and more 1000+ contaminants from source water NSF/ANSI Standard 58 certificated.Polyamide film composite material,food grade ,BPA free DIMENSION-2.8"Diameter x 13.2”Length, it is special designed for Geekpure RO-TW series Reverse Osmosis System (item number: 233729369273),housing inlet/outlet:1/4".Friendly Design,Easy installation.It is suitable for most Reverse Osmosis Water Filtration System Life Span-It depends on usage amount and feed water quality. Usually,24 months or 35,000 Gallons pure water for most tap water (200-500 ppm).Please note to flush new membrane 30 minutes.DO NOT FREEZE Operation Specification: FEED WATER PRESSURE :50 - 100 PSI (Best feed water pressure is 60-80 psi,if less 40psi,please cosnider to add booster pump). TEMPERATE: 40 - 110°F/5-45°C PH :3.0 -11.0 MAX TDS 1000 MG/L TURBIDITY < 1.0 NTU MAX SDI <4.0 HARDNESS < 5 GPG IRON <0.1 Life time :15-24 months as your feed water quality Shelf life: 3 years in original sealed package. Note: 1. DO NOT FREEZE. 2. If you have chlorinated water, we recommend you use a Carbon/Sediment Pre-Filter. The residual chlorine in municipal or city water will destroy the membrane. if hardness is too high, we recommend you install water softener before Ro unit. Key Product Features : Membrane and housing together It is work with standard Reverse Osmosis System,very easy to install and replace.75GPD membrane with quick change membrane housing, no need extra Membrane Housings.inlet/outlet is 1/4"tube. you may connect it with quick fitting. Wastewater ratio is 1:2 NSF certificated Thin-film composite RO membrane filters with higher water production rate. 2 gallons wastewater will be produced for every gallon pure water. More valuable information: 1. It looks special a little, What is type Ro membrane? ANSWER: It is work with standard Reverse Osmosis System,75GPD membrane with quick change membrane housing, not need extra Membrane Housings. inlet/outlet is 1/4"tube. you may connect it with quick fitting. 2. What is the life time? ANSWER: Our suggestion is 24 months for most tap water (200-500ppm).usually, you replace membrane depends on usage amount and feed water quality. if tap water is very good quality (200ppm or less), you may replace the membrane per 36months. if hard water area, someone replace membrane 6months or 12months. it is time to replace if flow rate is too less or membrane is cloged. 3. Could i use it if my water Total Dissolved Solids is over 1000 ppm or well water? ANSWER: Yes, you can use it. even TDS reach 2000 ppm. but you should replace membrane every 12 months or more frequently.1000ppm is our suggestion. 4. Can this be used for brackish water(5000ppm) or ocean water with high salinity(35000ppm)? ANSWER: No. it is just designed for residential tap water use. if you need Ro membrane for brackish water or ocean water and industrial use, Geekpure can provide too, please send email to us. 5. What is in the box? ANSWER: Just 1pc membrane with quick change membrane housing. but wrench and flow restrictor need to be bought separated. Why do you feel pure water getting slower in the winter? Different temperature,different water pressure and feed water quality, the product water capacity is different. i attach test work condition for refer. feed water pressure: 70psi. work temperature: 77F or 25C. Nacl concentration: 250 ppm. recovery: 15%.
Specifications
| Return Shipping Will Be Paid By | Seller |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| Model | GP-75G |
| Country/Region Of Manufacture | China |
| Item Height | 12 in |
| Number Of Filtration Stages | 1-Stage |
| Item Width | 1.8 in |
| Compatible Brand | Geekpure |
| Material | POLYAMIDE |
| Filtration Method | Reverse Osmosis |
| Capacity | 75 GPD |
| Type | Water Filter |
| Compatible Model | For Geekpure FFD |
| Color | White |
| MPN | Does Not Apply |
| Product Dimensions | 2.8 x 2.8 x 14 inches |
| Item Weight | 8.8 ounces |
| Brand | Geekpure |
| Manufacturer Warranty | 1 Year |
| Suitable For | Commercial |
About this item 75 GPD Ro Membrane with quick change membrane housing, extra tool is not required.98% Stabilized Salt Rejection (Minimum Rejection 96%).Dry type TFC Membrane,Maximizing shelf life.the ratio of pure water and waste water is 1:2.Pack of 2 High Efficient-Rejects impurities down to 0.0001 micron,Removes Heavy Metal,Arsenic,Lead,Mercury,Fluoride,Cadmium and more 1000+ contaminants from source water NSF/ANSI Standard 58 certificated.Polyamide film composite material,food grade ,BPA free DIMENSION-2.8"Diameter x 13.2”Length, it is special designed for Geekpure RO-TW series Reverse Osmosis System (item number: 233729369273),housing inlet/outlet:1/4".Friendly Design,Easy installation.It is suitable for most Reverse Osmosis Water Filtration System Life Span-It depends on usage amount and feed water quality. Usually,24 months or 35,000 Gallons pure water for most tap water (200-500 ppm).Please note to flush new membrane 30 minutes.DO NOT FREEZE Operation Specification: FEED WATER PRESSURE :50 - 100 PSI (Best feed water pressure is 60-80 psi,if less 40psi,please cosnider to add booster pump). TEMPERATE: 40 - 110°F/5-45°C PH :3.0 -11.0 MAX TDS 1000 MG/L TURBIDITY < 1.0 NTU MAX SDI <4.0 HARDNESS < 5 GPG IRON <0.1 Life time :15-24 months as your feed water quality Shelf life: 3 years in original sealed package. Note: 1. DO NOT FREEZE. 2. If you have chlorinated water, we recommend you use a Carbon/Sediment Pre-Filter. The residual chlorine in municipal or city water will destroy the membrane. if hardness is too high, we recommend you install water softener before Ro unit. Key Product Features : Membrane and housing together It is work with standard Reverse Osmosis System,very easy to install and replace.75GPD membrane with quick change membrane housing, no need extra Membrane Housings.inlet/outlet is 1/4"tube. you may connect it with quick fitting. Wastewater ratio is 1:2 NSF certificated Thin-film composite RO membrane filters with higher water production rate. 2 gallons wastewater will be produced for every gallon pure water. More valuable information: 1. It looks special a little, What is type Ro membrane? ANSWER: It is work with standard Reverse Osmosis System,75GPD membrane with quick change membrane housing, not need extra Membrane Housings. inlet/outlet is 1/4"tube. you may connect it with quick fitting. 2. What is the life time? ANSWER: Our suggestion is 24 months for most tap water (200-500ppm).usually, you replace membrane depends on usage amount and feed water quality. if tap water is very good quality (200ppm or less), you may replace the membrane per 36months. if hard water area, someone replace membrane 6months or 12months. it is time to replace if flow rate is too less or membrane is cloged. 3. Could i use it if my water Total Dissolved Solids is over 1000 ppm or well water? ANSWER: Yes, you can use it. even TDS reach 2000 ppm. but you should replace membrane every 12 months or more frequently.1000ppm is our suggestion. 4. Can this be used for brackish water(5000ppm) or ocean water with high salinity(35000ppm)? ANSWER: No. it is just designed for residential tap water use. if you need Ro membrane for brackish water or ocean water and industrial use, Geekpure can provide too, please send email to us. 5. What is in the box? ANSWER: Just 1pc membrane with quick change membrane housing. but wrench and flow restrictor need to be bought separated. Why do you feel pure water getting slower in the winter? Different temperature,different water pressure and feed water quality, the product water capacity is different. i attach test work condition for refer. feed water pressure: 70psi. work temperature: 77F or 25C. Nacl concentration: 250 ppm. recovery: 15%.
Related Items
