Milwaukee 2855-20 M18 FUEL 1/2" Compact Impact Wrench w/ Friction Ring Bare Tool
Milwaukee 2855-20 M18 FUEL 1/2" Compact Impact Wrench w/ Friction Ring Bare Tool The M18 FUEL 1/2" Compact Impact Wrench w/ Friction Ring is the most compact in its class, delivering you the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 4.9" in length with a POWERSTATE Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The MILWAUKEE 1/2" Compact Impact Wrench has tri-LEDs that surround the anvil to deliver you brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. Features:4.9" in length provides most access in tight spaces The POWERSTATE™ brushless motor delivers up to 250 ft-lbs. of nut-busting torque Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode Auto shut-off mode prevents over tightening and increases productivity by applying no more than 20 ft-lbs. of torque. Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened. Mode 1 RPMs: 0-900; Mode 2 RPMs: 0-1,650; Mode 3 RPMs: 0-2,400; Mode 4 RPMs: 0-2,400 Mode 1 IPMs: 0-1,000; Mode 2 IPMs: 0-2,400; Mode 3 IPMs: 0-3,500; Mode 4 IPMs: 0-3,500 REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge Works in up to to 69kV environments Compatible with all M18™ batteries & Chargers Specifications:Wrench TypeCompactAnvil TypeFriction RingFastening Torque250 ft/lbsMaximum Torque250 ft/lbsIPM0 - 3,500 ipmNut-Busting Torque250 ft/lbsTool Warranty5 Year Limited WarrantyPower SourceCordless Battery: No IncludedMotor TypePOWERSTATE™ BrushlessMaterial CompositionAluminumLength4.9 inWeight3.9 lbHeight7.95 inWidth2.56 inBrushlessYesBattery SystemM18Chuck TypeNot ApplicableChuck SizeNot ApplicableDRIVE CONTROL4-Mode w/ Bolt Removal ModeMaximum RPM2400 rpmPeak Torque250 ft-lbsRPM Range0 - 2,400 rpm
Specifications
| Return Shipping Will Be Paid By | Seller |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Refund Will Be Given As | Money Back |
| Maximum Torque | 250 ft-lbs |
| Battery Technology | Lithium-Ion (Li-Ion) |
| Power Source | Battery |
| MPN | 2855-20 |
| Brand | Milwaukee |
| Type | Impact Wrench |
| Voltage | 18 V |
| Motor Type | Brushless |
| Model | 2855-20 |
| Features | Compact |
| Power | Battery |
Milwaukee 2855-20 M18 FUEL 1/2" Compact Impact Wrench w/ Friction Ring Bare Tool The M18 FUEL 1/2" Compact Impact Wrench w/ Friction Ring is the most compact in its class, delivering you the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 4.9" in length with a POWERSTATE Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The MILWAUKEE 1/2" Compact Impact Wrench has tri-LEDs that surround the anvil to deliver you brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. Features:4.9" in length provides most access in tight spaces The POWERSTATE™ brushless motor delivers up to 250 ft-lbs. of nut-busting torque Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows 4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode Auto shut-off mode prevents over tightening and increases productivity by applying no more than 20 ft-lbs. of torque. Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened. Mode 1 RPMs: 0-900; Mode 2 RPMs: 0-1,650; Mode 3 RPMs: 0-2,400; Mode 4 RPMs: 0-2,400 Mode 1 IPMs: 0-1,000; Mode 2 IPMs: 0-2,400; Mode 3 IPMs: 0-3,500; Mode 4 IPMs: 0-3,500 REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge Works in up to to 69kV environments Compatible with all M18™ batteries & Chargers Specifications:Wrench TypeCompactAnvil TypeFriction RingFastening Torque250 ft/lbsMaximum Torque250 ft/lbsIPM0 - 3,500 ipmNut-Busting Torque250 ft/lbsTool Warranty5 Year Limited WarrantyPower SourceCordless Battery: No IncludedMotor TypePOWERSTATE™ BrushlessMaterial CompositionAluminumLength4.9 inWeight3.9 lbHeight7.95 inWidth2.56 inBrushlessYesBattery SystemM18Chuck TypeNot ApplicableChuck SizeNot ApplicableDRIVE CONTROL4-Mode w/ Bolt Removal ModeMaximum RPM2400 rpmPeak Torque250 ft-lbsRPM Range0 - 2,400 rpm
Related Items
