VOLTSET 20W Solar Panel Kit 12V Solar Battery Trickle Charger Maintainer for RV
This solar panel kit is mainly used to maintain and trickle charge the 12V battery to extend the battery life throughout the year. The solar car charger is made of high-quality monocrystalline silicon material, which is impact-resistant, wind-snow-resistant, corrosion-resistant, and can adapt to any bad weather. The upgraded 10A MPPT charge controller is 25%-30% more efficient than conventional controllers. The controller adopts a fully glued design to avoid the possibility of water intrusion and moisture on rainy and snowy days as much as possible. The 360° adjustable and corrosion-resistant aluminum alloy frame makes the solar panel more durable than other solar panels. Equipped with four anti-fall angles, there is no need to worry about the solar panel breaking and scratching the arms. Note: Please look for the brand VOLTSET. We are official and genuine products, and our customers enjoy 12-month free warranty service and lifetime technical support. Thank you for supporting and choosing VOLTSET. ------------------------------------------------------------------------------------------------------------------------------------------------------------- 20W Solar Panel Kit For 12V Battery Maintenance & Trickle Charging Why We Need a Solar Trickle Charger or Battery Maintainer Batteries consume power slowly and car batteries will discharge automatically when the car is not used for a long time If the battery is completely depleted, even if it is fully charged again, the maximum capacity of the battery will be reduced The battery life will be reduced if the battery is not used and charged for a long time. 12V battery whose voltage is not kept above 12.4V has the possibility of sulfation, which is the main reason for the failure of many batteries. It is the knowledge of this knowledge is very few people, so the battery life will be shorter and shorter if not used for a long time. Upgraded 100% Waterproof 10A Charger Controller The upgraded 10A MPPT charge controller is 25%-30% more efficient than conventional controllers. The controller adopts a fully glued design to avoid the possibility of water intrusion and moisture in rainy and snowy days as much as possible. High Conversion Rate - the conversion rate of monocrystal can reach 30%, while polycrystalline is only 15%. Trickle & Maintain - makes up for the capacity loss caused by self-discharge after the battery is fully charged; beneficial to 12v battery maintenance and extending the life of the battery. This 20W solar battery charger provides full protection for all types of 12V batteries from overcharge, overvoltage, anti-reverse charge, over discharge, short circuit, etc. This solar trickle charger is made of high quality monocrystalline silicon solar chip cells, with a solar charging conversion efficiency of up to 30%. The battery panel surface is made of tempered solar glass which is different from others to achieve more than 2 times of solar light reabsorption, further improving the solar energy absorption efficiency. The solar car charger is made of high-quality monocrystalline silicon material, which is impact-resistant, wind-snow-resistant, corrosion-resistant, and can adapt to any bad weather. This solar trickle charger is equipped with a 360° adjustable mounting bracket, that can be used to position the panel at any angle, and easily mount the stand on the ground, wall, and roof,etc. The solar battery maintainer comes with protective on 4 corners to better protect the glass panel. During installation, the safety is protected from scratches. LED Indicators Monitoring With 3 clear LED indicators to help you visualize the working status and battery condition well at all times. Red light and Blue light (Charging) Blue light (In Sunlight) Green Light (Full Charge) No Light (Short Circuit) When solar power fails, you can check the connection in time. The solar charge maintainer is only powered by solar panels and does not consume battery power.
Specifications
| Return Shipping Will Be Paid By | Seller |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Current Output | 1.11A |
| System Configuration | Hybrid |
| Solar Technology | Monocrystalline |
| Power Source | Solar |
| Wattage | 20w |
| Voltage | 12 V |
| Connector Type | SAE to Alligator Clip |
| Protection Properties | Low Voltage Protection |
| Pliability | Rigid |
| Maximum Input Voltage | 18V |
| Inverter Technology | Battery-Based |
| Color | Silver |
| Current Rating | 1.11A |
| Brand | Voltset |
| Type | Solar Panel Kit |
| Connector Configuration | SAE connector |
| Model | VS-K-20W-JPB |
| Recommended Environment | Outdoor |
| Country/Region Of Manufacture | China |
| Resistance Properties | Waterproof |
| Application | Camping/Hiking |
| Power | 20w |
This solar panel kit is mainly used to maintain and trickle charge the 12V battery to extend the battery life throughout the year. The solar car charger is made of high-quality monocrystalline silicon material, which is impact-resistant, wind-snow-resistant, corrosion-resistant, and can adapt to any bad weather. The upgraded 10A MPPT charge controller is 25%-30% more efficient than conventional controllers. The controller adopts a fully glued design to avoid the possibility of water intrusion and moisture on rainy and snowy days as much as possible. The 360° adjustable and corrosion-resistant aluminum alloy frame makes the solar panel more durable than other solar panels. Equipped with four anti-fall angles, there is no need to worry about the solar panel breaking and scratching the arms. Note: Please look for the brand VOLTSET. We are official and genuine products, and our customers enjoy 12-month free warranty service and lifetime technical support. Thank you for supporting and choosing VOLTSET. ------------------------------------------------------------------------------------------------------------------------------------------------------------- 20W Solar Panel Kit For 12V Battery Maintenance & Trickle Charging Why We Need a Solar Trickle Charger or Battery Maintainer Batteries consume power slowly and car batteries will discharge automatically when the car is not used for a long time If the battery is completely depleted, even if it is fully charged again, the maximum capacity of the battery will be reduced The battery life will be reduced if the battery is not used and charged for a long time. 12V battery whose voltage is not kept above 12.4V has the possibility of sulfation, which is the main reason for the failure of many batteries. It is the knowledge of this knowledge is very few people, so the battery life will be shorter and shorter if not used for a long time. Upgraded 100% Waterproof 10A Charger Controller The upgraded 10A MPPT charge controller is 25%-30% more efficient than conventional controllers. The controller adopts a fully glued design to avoid the possibility of water intrusion and moisture in rainy and snowy days as much as possible. High Conversion Rate - the conversion rate of monocrystal can reach 30%, while polycrystalline is only 15%. Trickle & Maintain - makes up for the capacity loss caused by self-discharge after the battery is fully charged; beneficial to 12v battery maintenance and extending the life of the battery. This 20W solar battery charger provides full protection for all types of 12V batteries from overcharge, overvoltage, anti-reverse charge, over discharge, short circuit, etc. This solar trickle charger is made of high quality monocrystalline silicon solar chip cells, with a solar charging conversion efficiency of up to 30%. The battery panel surface is made of tempered solar glass which is different from others to achieve more than 2 times of solar light reabsorption, further improving the solar energy absorption efficiency. The solar car charger is made of high-quality monocrystalline silicon material, which is impact-resistant, wind-snow-resistant, corrosion-resistant, and can adapt to any bad weather. This solar trickle charger is equipped with a 360° adjustable mounting bracket, that can be used to position the panel at any angle, and easily mount the stand on the ground, wall, and roof,etc. The solar battery maintainer comes with protective on 4 corners to better protect the glass panel. During installation, the safety is protected from scratches. LED Indicators Monitoring With 3 clear LED indicators to help you visualize the working status and battery condition well at all times. Red light and Blue light (Charging) Blue light (In Sunlight) Green Light (Full Charge) No Light (Short Circuit) When solar power fails, you can check the connection in time. The solar charge maintainer is only powered by solar panels and does not consume battery power.
Related Items
